Airbus 380 Compartment Access Stands # 20113

Home » Airbus 380 Compartment Access Stands # 20113
Airbus 380 Compartment Access Stands # 20113 2018-06-08T16:53:31+00:00
A-320 Compartment Access Stand #20113
A-320 Compartment Access Stand #20113
A-320 Compartment Access Stand #20113
A-320 Compartment Access Stand #20113
A-320 Compartment Access Stand #20113
A-320 Compartment Access Stand #20115

A-380 COMPARTMENT ACCESS STAND – SPLIT HEIGHT – PART# 20113

Features:
Split height stand with upper and lower steps side by side. Lower steps lead to the cargo door allowing personnel to unlock the cargo door and the upper step leads to the cargo door switch allowing personnel to open the door without impeding the path of the cargo door as it is opening.
Forward assent & descent stair.
Heavy duty steel construction.
Top Deck: 113” high x 54” wide x 31” deep.
Overall Footprint: 148” long x 55” wide x 113” overall height.
Single action plunge brakes. Just pull back on a lever and the stand is locked in place.
Heavy duty tow bar.
Galvanized steel ‘Grip Strut’ (saw tooth design**) steps with “signature” baked on safety yellow anti-slip leading edge.
2 – 16” x 4” solid rubber main wheels with heavy duty axles and hubs.
2 – 8” x 2” Urethane over steel wheels with heavy duty KPL swivels.
This stand can be towed at faster than recommended speeds without wheel wobble (a WAAG “signature” feature).
“Signature” design of heavy wall 1.5” round steel tubing mounted to stair rail in two places at lower end. This design avoids potential damage and creates a very sturdy unit both in up and down and side to side action.
Easily maneuvered by hand.
More than ample cross bracing for durability and long service life.
Powder coated finish with WAAG safety orange (other colors on request). Second powder coat of U.V. resistant clear for long service life.
*Any size stand can be made to order.
**Other step designs in galvanized steel and aluminum are available.

A-380 COMPARTMENT ACCESS STAND – PART# 20115

Features:
Single stand with an upper and lower deck. This design eliminates the lower post on the hand rail, a safety issue. The hand rails are also solidly mounted to the upper deck. Very easy to maneuver by hand.
Optional Hand Rails on lower deck: Easily rotate down and out of the way to allow the opening and closing of the cargo doors. These handrails can be unlatched easily and rotated up or down from the deck area or from the ground. Self closing gates between the upper and lower deck provide additional safety.
Forward assent & descent stair with platforms.
Heavy duty steel construction.
Upper deck; 70” high x 47” wide x 29” deep*
Lower deck; 60” high x 47” wide x 48” deep*
Foot print; Approximately 54” wide x 134” long.*
Single action plunge brakes.
Just pull back on a lever and the stand is locked in place.
Heavy duty tow bar.
Galvanized steel ‘Grip Strut’ (saw tooth design) steps** with “signature” baked on safety yellow anti-slip leading edge.
2 – 16” x 4” solid rubber main wheels with heavy duty axles and hubs.
2 – 8” x 2” Urethane over steel wheels with heavy duty KPL swivels.
The stand can be towed at faster than recommended speeds without wheel wobble (a WAAG “signature” feature).
Hand Rails on stairs and upper deck: “Signature” design of heavy wall 1.5” steel tubing mounted to stair rail in two places at lower end. This design creates a very sturdy hand rail that resists flexing both vertically and horizontally. This design eliminates the lower post on the hand rail, a safety issue. The hand rails are also solidly mounted to the upper deck. This stand is very easy to maneuver by hand.
More than ample cross bracing for durability and long service life.
Powder coated finish with WAAG safety orange (other colors on request). Second powder coat of U.V. resistant clear for long finish life.
*Any size stand can be made to order.

Made in the U.S.A. by WAAG